Your cart is currently empty!
NOYAFA NF-8209S Network Cable Tester and Tracer with Anti-jamming Probe, Crimp, PoE Port
$89.95
In stock
Description
NOYAFA NF-8209S Network Cable Tester and Tracer with Anti-jamming Probe, Crimp, PoE Port
Features:
- Locate The Target Cable Quickly – Two scanning modes, analog and digital, can be switched at any time, with an anti-jamming probe, adjustable sensitivity, tone generator, and LED light, so that the receiver can quickly and accurately locate the target cable in a wide variety of complex environments.
- Ethernet Continuity Test – Analyze CAT5 CAT6 (STP & UTP) line faults, such as normal, open circuit, short circuit, and cross, and see the results instantly.
- Measure Cable Length Accurately – Measure the network cable in the range of 2.5m-500m.
- Port Blink Test – Identify the network port by the blinking port light on the Hub or Switch. Available to 10M/100M/1000M Hub/ switch.
- PoE Testing – Identify which pins are providing power and detect how much voltage, and identify which type of PSE (AT/AF standard).
- Work Safely – Non-Contact Voltage (NCV) tester detect AC voltage (70V-1000V) without disrupting the electrical system, providing you with maximum safety and convenience.
- Rechargeable Battery– The network tester can be recharged using a USB-C cable, and the lithium battery provides long-lasting power.
- Other Functions – Quality control of the crimping crystal.
- Certification – Passes RoHS, FCC, and CE compliance testing, and Noyafa is certified to the ISO 9001 standard.
Specifications:
Wiremap:
- Cable types: CAT5/CAT6
- Cable sequence and fault testing: Normal, open circuit short circuit, cross,etc
- STP/UTP: Both compatible
- Max range: 600m / 1,968ft
QC Test:
- Test type: 8P
- Response speed: No longer than 1 second
- Minimum recognition: 10cm / 3in
Length:
- Test line: CAT5 & 6
- Test range: 2.5 – 200m /8 – 656ft
- Accuracy: ≤20m±4.6m; 20-100m ±2.4m; >100m±3.2m
Scan:
- Cable type: CAT5 & 6
- Max signal voltage: 5V ± 1.0VP-P
- Frequency: 455KHz
- Dual mode: Analog / digital mode
- Max range: 600m / 1,968ft
PoE:
- Voltage test range: DC 5-60V
- Power supply core jumper mode: End jumper, middle jumper, 8-core power supply, unknown.
- PSE type: Non-standard, IEE802.3at/af
Port Blinks
- Full-duplex/ half-duplex recognition
- Auto-negotiation/ non-auto-negotiation
- Switch type: 10m/100m/1000m
Transmitter:
- LCD Display: 180*64 with backlight
- Language: Chinese/English
- Ports: RJ45 * RJ11
- Power supply: 3.7V 1400mAh polymer lithium battery
- Low battery power indication: yes
- Auto-off: 15/30/60min or off
- Voltage protection: DC60V
- Maxi working current: ≤200mA
- Size: 125*70*32mm
Receiver:
- Adjustable scan strength: Yes
- NCV: AC70V – 1000V 50/60Hz
- Voltage protection: DC 60V
- Maxi working current: ≤200mA
- Ports: RJ45
- Voice prompt: yes
- Headphone jack: yes
- LED: Power indication & LED lighting
- Power supply: 3.7V 1400mAh polymer lithium battery
- Size: 198*50*30mm
Reviews
There are no reviews yet.